- All products
- Access
- Backhaul
- Surveillance
- Industrial applications
- Operators
- Rural connectivity
- Enterprise Wi - Fi
- Hotspot
Power Up. Link Up. Watch.
A pre-configured point-to-point kit built for video surveillance. The two LigoVision 5-15ac units come paired from the factory: mount them, power them up and the wireless link comes up on its own. Plug your IP camera into the second Ethernet port and it is powered over PoE and detected automatically. No computer, no configuration, video in minutes.
LigoVision 5-15ac PTP Kit
Pre-configured 5GHz Wireless Link For IP Cameras
Getting a camera onto the network across a yard, a field or a parking lot should not require a network engineer. The LigoVision 5-15ac PTP Kit puts two factory-paired LigoVision 5-15ac units in one box, ready to install.
The state-of-the-art RF design with an integrated 15dBi antenna delivers great output power, improves range, and enables high-capacity transmission over 256-QAM.
+500Mbps of throughput—the result of a powerful hardware platform with an 802.11ac technology-based radio and the LigoWave iPoll 3 Proprietary Protocol.
Mount. Power up. Connect the camera. Install one unit at the camera site and one at your network side, connect power and the units find each other automatically. Plug the IP camera into the second Ethernet port and it is powered and detected. Adjust your camera Field of View using your laptop or phone WiFi. No software to install, no wires to swap
LigoVision PTP Kit is Designed For
Internet Access
Video Surveillance
Rural Connectivity
Infinity Controller
Add the PTP kit to the LigoWave Infinity Controller to monitor the link and manage both units remotely, together with the rest of your LigoWave network. The Infinity Controller is a wireless network management platform available for the NFT series, LigoDLB series and LigoPTMP series (monitoring only). The controller allows users to install, manage, and expand NFT Wi-Fi networks and DLB networks using automated device onboarding, predefined network scenarios, and other features. The Infinity Controller for the DLB and PTP series allows users to simplify the way they build, expand, and maintain their wireless networks.
Plug and Play
The two units are paired and configured at the factory. There are no IP addresses, frequencies or passwords to set: power them up and the link is established automatically. LigoWave OS still gives installers the full toolset whenever they need it.
Nothing to Configure
Both units come paired out of the box. Power them up and the link comes up on its own.
Automatic Camera Detection
Connected IP cameras are detected automatically, and their live video can be opened right away from a smartphone or laptop. Connect your phone to the LigoVision's 2.4GHz Wi-Fi to watch the live video and adjust the camera right there on the pole, no laptop needed.
Spectrum analyzer
Exams any RF (Radio Frequency) sources across all available spectrums
PoE Out Powers the Camera
The second Gigabit Ethernet port provides 802.3af PoE (up to 15W), so the IP camera is powered directly by the radio. One cable to the camera does it all.
The Link Calculator
Enables the installer to measure network throughput and link quality without additional equipment.
Setup From Your Phone
The built-in 2.4GHz management radio lets you check the link and manage both devices from a smartphone or tablet. No computer or cable needed.
Integrated Surge Protection
3kV line-to-ground and 1kV line-to-line protection allows operation und harsh weather conditions and unstable electrical installations.Pre-configured, factory-paired PTP link
Plug and play: power up and link
Automatic IP camera detection
2.4GHz management radio (setup from phone)
PoE out (802.3af, up to 15W) for the camera
500+ Mbps capacity
High power (30 dBm) radio
Proprietary protocol (iPoll)
Zero loss design
Integrated surge protection
Integrated 15dBi antenna
RTSP discovery and streaming
PTMP Mode: 3km
PTP mode: 5km
Interfaces
1 x 1000 Base-T (802.3at/passive PoE In, 48VDC)
1 x 1000 Base-T (802.3af/passive PoE Out, 48VDC)
