What’s new in LigoPTP RapidFire 7.61 firmware release

v7.61

(April, 2019)

New:

  • Added DSCP to 802.1p priority remap on VLAN tagged traffic
  • Added 15/30/60MHz bandwidth configuration for 6GHz licensed band
  • Added option to restrict access to management VLAN from Ethernet on slave
  • Increased MTU size to 2184 bytes
  • Added SNMP v3

Improvements:

  • Renamed Noise level to Noise floor

Fixes:

  • Fixed after multiple DFS events traffic does not go through the link
  • Fixed LigoWave Controller agent to include DFS CAC information
  • Fixed save button when password is not valid in password change dialog
  • Fixed LACP packets passthrough in core
  • Added “List is empty” message in Remote site table
  • Fixed Link quality reporting on Master device
v7.60

(September, 2018)

New:

  • Added custom center frequency  and channel width support for RapidFire 6 GHz.
  • Added automatic firmware update from FTP server.
  • Added remote syslog configuration.

Fixes:

  • Fixed empty ATPC signal target in RSSI after reset to defaults.
  • Fixed Max Tx data rate undefined value under “Information” tab.

v7.59

(May, 2018)

New:

  • Added Infinity Controller agent support
  • Added Data VLAN on RapidFire support

Fixes:

  • Fixed issue when after radar detection DFS moves to not allowed EIRP channel
  • Fixed Second Ethernet port management

v7.58-1

(April, 2018)

New:

  • Added remote spectrum scan support on the Slave
  • Added validation in system LED settings
  • Added validation in wireless management service settings

Fixes:

  • Fixed Wizard active button colors
  • Fixed 2dB lower transmit power for US country code
  • Fixed validation message in system alerts settings
  • Fixed constant “Decrypt error count” message flood
  • Fixed Management frame protection node capability check issue

WPA2 key reinstallation attack (KRACK) does not affect LigoPTP RapidFire
v7.53-7

(November, 2017)

New:

  • Added MIMO/SISO mode control from the Master device
  • Added wireless management frames protection

Improvements:

  • Improved Management SSID generation, when device configuration is uploaded from backup file
  • Added additional messages in log files to indicate, when device password or link encryption password is incorrect

Fixes:

  • Fixed max data rate input field update issue after changing channel width
  • Fixed QoS “Strict” policy prioritization issue
  • Fixed issue related to IP address validation – no validation was done, when address starts with 0

v7.53-6

(October, 2017)

New:

  • Added functionality to set/limit maximum data rate when auto-rate function is enabled
  • Added option to configure target signal level for ATPC
  • Added discovery services configuration

Fixes:

  • Fixed constant error messages on narrow (5/10MHz) channels
  • Fixed Slave management from Master device
  • Fixed Kernel crash once debug mode enabled on ath0 radio

v7.53-5

(November, 2016)

Fixes:
  • Fixed device recovery after radio firmware crash
  • Fixed TCP and Multicast traffic performance
  • Fixed broadcast traffic encryption
  • Fixed long session time issue

v7.53-4
Fixes:
  • Fixed random device reboots
  • Fixed Multicast traffic issue which was decreasing TCP speed
  • Fixed WMI_EVENT_ALLOC_FAILURE issue

  • Fixed WDS entry full table issue

  • Updated regdomain for Bulgaria country code

Improvements:
  • Improved broadcast traffic encryption
  • Improved performance in noisy environment

  • Updated combo-box style in “Restore device config” form

  • Improved auto rate algorithm in high PER environment

v7.53-3
New:
  • Added SNMP traps
  • Added Ligowave wireless MIBs with proprietary SNMP objects
Fixes:
  • Fixed issue when radio stops passing traffic after receiving jumbo packet
  • Fixed DFS working algorithm
  • Fixed high jitter ping issue
  • Fixed small packets issue
  • Fixed tcp throughput issues
  • Fixed high latency graph
  • Fixed issue when link connects in legacy data rates

v7.53-2
New:
  • Added Idle/Active operation states, which balance between low latency and high throughput

Improvements:
  • Improved link stability and performance in low temperature environment
  • Applied DFS FCC waveform tuning

Fixes:
  • Fixed GUI issues when CT country configured with more than 31 dBm gain
  • Fixed TX leakage in DFS channels

v7.53-1
New:
  • Added Public Safety (PS) country code
Improvements:
  • Removed “Hide indoor channels” option
Fixes:
  • Fixed Site Survey note
  • Fixed Max tx power settings on Master’s “Manage remote device” window
  • Fixed Datarate information when one tx stream is configured

v7.53

New:

  • Added more info on Monthly Graph
  • Added Spatial data streams drop down list
  • Added Latency graph in Status | Graphs section
  • Added Ping tool
  • Added Traceroute tool
  • Added Broadcast traffic encryption
  • Added compatibility with Internet Explorer for Linktest and Ping&Trace
  • Added legend and tool-tip to site survey charts
  • Added Spectrograph for Spectrum Analyzer
  • Added progress indicator in Wizard/discovery
  • Added language change option on setup wizard

Improvements:

  • Improved GUI to be firmware update available from phone or tablet
  • Improved GUI informational messages
  • Improved Spectrum analyzer to live spectrum scan

Fixes:

  • Fixed Spelling mistake in graphs window
  • Fixed not to show frequency marker in Spectrum Analyzer if DFS is active
  • Fixed passthrough packet with VLAN tag
  • Fixed Firefox and Chrome hanging on “applying changes” on main link’s settings
  • Fixed spectrum analyzer to stop properly when exiting other page

v7.51-1

Fixes:
  • Fixed throughput decrease with tagged traffic
  • Fixed Linktest error message
  • Fixed outdated graph data on Site Survey
  • Fixed Data VLAN passthrough

v7.51 (LigoPTP RapidFire)

Initial release