Infinity NFT 1Ni Installation

The small form factor and professional metal NFT 1Ni enclosure makes this product ideal not only for residential, but also for an enterprise and industrial applications. Device has built in screw mount plate for wall or ceiling installation. Screw the two screws in straight line with 6.5cm distance from each other.


PoE connection example:

It is recommend to use 18-24 voltage PoE.


Infinity NFT 2N Installation

Device has a screw mount plate for wall and ceiling installation

Screw the three screws in isosceles triangle with 10.5cm distance from each other.



Infinity NFT 2N could be powered up with 48V af PoE or af switch


NFT 1Ni has integrated Ethernet port with PoE pass-through support. It allows to power a second device directly without an additional power supply. It is giving 24V PoE pass-through and could power outdoor CPE’s and AP’s.
PoE passthrough functionality
To enable 24V PoE pass-through enter Settings | System section.

There are some main rules in wireless network planning for hotspots.  In 2.4 GHz there are only 3 non overlapping channels: 1, 6, and 11. All large wireless networks could be built from many clusters.  One network cluster is formed from 3 different frequency cells. One cell is served by one access point.


Adjacent frequencies have to be different and separated by one neighboring frequency this is important aspect in wireless network planning. This type of network planning helps avoid interference and improves link quality. On the 5 GHz wifi network more frequency channels  are used. This helps to improve network quality by choosing adjacent frequencies that are separated by two or three neighboring frequencies. 5 Ghz network clusters could be made from 7 or more different frequency cells.

To improve connection quality on the hight interference it is recommend to set BA window size 8 to reduce packet loss and retries. If environment is clear BA 64 recommended for max performance.