New v6.76 firmware

LigoWave is announcing a new firmware version for LigoPTP MiMo series equipment that will have a major breakthrough for the fine-tuning of LigoPTP links for maximum performance. These new features include: automatic data rate, smart auto-channel and automatic transmit power control.

Automatic data rate

Automatic data rate option will allow users to rely on their link even if the environment around the link is constantly changing. In the event of interference or loss of signal from some other environmental factor, the link will automatically lower the data rate and modulation to obtain an acceptable error rate. 

Smart auto-channel

Smart auto-channel detection system makes LigoPTP MiMo series extremely noise resistant. The master changes the link operating frequency during the startup, after interference detection, or every 5 minutes if there are no slave devices connected to the master at the time of pre-scan. Service providers can specify the channel hopping list for their master site operation to use only specific channels available in the area. Smart auto channel will also sense interfering signals and will shift the channels accordingly.

Automatic transmit power control

The idea of the mechanism is to automatically reduce the used transmission output power when other networks are within range. Reduced power means reduced interference problems.

To download the new firmware image click here.

WNMS v1.1

In the new WNMS version users will find:

• Automatic wireless topology drawing according to connectivity status of the equipment
• Device warranty and next day replacement tracking and alerting (on device popup in the customer services section)
• Improved GUI
• Improved e-mail alerting per network and per alert definition
• Multiple language support